Sale

Easter sale - ends soon

Legacy Beaded Tongue & Groove Paintable MDF Panel

£44.99

£44.99 ~~£89.99~~ Save £45

Colour: Beaded

Panel Size 2.4m x 0.6m 0.8m x 0.6m

Finish Primed Unprimed

Quantity

Quality craftsmanship in the UK
Designed for quick & easy installation

Make 3 payments £6.66 with Learn more

18+, T&C apply, Credit subject to status.

Description

Our Legacy Beaded MDF panels offer a modern take on the classic tongue and groove style panelling. Featuring a decorative beaded groove, they not only highlight the timeless elegance of traditional British craftmanship but also carry forward the rich history of panelling into your future interiors.

Available in Primed or Unprimed, these MDF panels are easy to customise to suit your design. Choose Primed for professionally primed panels, ready to paint with minimal prep. Alternatively, order Unprimed, then prep and apply a water-based primer at home before painting in your chosen colour.

Decorative beaded grooves for added charm
Primed or Unprimed finish options to suit project needs
6-in-1 design to speed up your interior transformation
Quick and easy installation with grab adhesive and pins
Discreet butt joint install technique for a seamless look
Crafted in the UK from moisture-resistant MDF for lasting quality

Dimensions & Details

Full Size Panel (mm) H2400 x W607 x D9

Half-Height Panel (mm) H800 x W607 x D9

Individual Section Size (mm) 85

Groove Size (mm) W14 x D3

Full Size Panel Coverage (m²) 1.44

Half-Height Panel Coverage (m²) 0.48

Composition Moisture-resistant MDF

Installation

To install, use grab adhesive on the back of your panels and place directly to your wall. Secure in place with pins.

Prep your wall
Adhesive on the panel
Secure in place

Download our fitting guide for more information.

Timeless Design, Effortless Installation

Incorporating traditional Georgian-style panelling in your home has never been easier. The Legacy Tongue and Groove panels slot together seamlessly with a discreet butt joint install technique. Each panel covers the equivalent of six individual planks for an effortless installation.

Primed and Ready to Paint

Customisation made simple. Our Legacy pre-primed MDF panels come ready to finish in any colour, removing the need for manual priming. Each one is crafted for smooth coverage and quicker installation, helping you achieve a flawless, bespoke painted look with ease.

Traditional British Craftmanship

Our Legacy panels use moisture resistant Hidrofugo MDF which creates a denser and more durable panel than using standard MDF. Its low absorption reduces time spent priming and painting whilst its moisture resistance makes it ideal for high-humidity and high-traffic areas.

Frequently Asked Questions

What sizes are the Paintable MDF Panels?

The panels are available in several profiles and dimensions:

Fluted, Reeded, Reeded Fine, SlatWall

Full Panel: 2400mm (H) x 600mm (W) x 12mm (D) Half-Height: 1200mm (H) x 600mm (W) x 12mm (D)

Beaded Tongue and Groove & V-Groove Tongue and Groove:

Full Panel: 2400mm (H) x 600mm (W) x 9mm (D) Half-Height: 800mm (H) x 600mm (W) x 9mm (D)

How do I install Legacy MDF panels?

Our Legacy MDF panels join together with a discreet butt joint install technique for a seamless look once painted. Apply Hybrid Grab Adhesive to the back of each panel and press firmly onto the wall. Use caulk on any join lines or pin holes and sand to smooth before painting. If needed, pin the panels with 25mm pins to aid adhesion. View our fitting guide for more details.

Do I need to prime my Legacy MDF panels?

We offer both pre-primed and unprimed panels to suit your project needs and DIY skill level. If you opt for unprimed panels, simply install them onto the wall, fill and caulk the seams, then apply a water-based primer until you achieve your desired coverage before painting. Pre-Primed panels are ready to paint.

What’s the best way to paint Legacy MDF panels?

You can use a brush, roller, or sprayer with your chosen paint colour and finish. For the best results, we recommend installing the panels first, sealing any gaps, and then painting. While pre-painting is possible, it may require touch-ups after installation and typically needs a large prep area.

How many Legacy MDF panels do I need?

Each panel covers 1.44m² (2400x600mm), 0.72m² (1200x600mm) or 0.48m²(800x600mm). Measure the height and width of your wall in metres, multiply these values together to calculate the total area, and divide by 1.44, 0.72, or 0.48 depending on panel size. Always round this up.

Why do some Legacy MDF panels have a green core?

Panels are crafted from moisture-resistant MDF, which often has a green core. This core may be visible in machined profiles but does not affect surface quality or paint application.

What is Hidrofugo moisture-resistant MDF?

Hidrofugo is a high-density, high-performance MDF with excellent moisture resistance, making it suitable for high-humidity areas like kitchens and bathrooms.

Can I install Legacy MDF panels in wet areas?

Panels made from Hidrofugo MDF are suitable for high-humidity areas but should not be exposed to direct water contact or excessive moisture.

Can I use Legacy MDF Panels in bathrooms or kitchens?

Yes, Legacy MDF Panels made with Hidrofugo moisture-resistant MDF are suitable for high-humidity areas such as kitchens and bathrooms, but they should not be exposed to direct water contact or excessive moisture. Always ensure proper ventilation.

How do I cut Legacy MDF panels?

For straight cuts, use a fine-toothed hand saw for a clean edge. A jigsaw can be used for larger sections, guide it carefully to avoid chipping. For middle cuts, drill a starter hole, then use a hand saw or jigsaw. For precise cuts, a multi-tool with a blade attachment is ideal.

How do I clean Legacy MDF panels?

Clean the panels with a soft brush nozzle on a vacuum or a damp cloth. Avoid abrasive cleaners and chemicals.

Can I install Legacy MDF panels on top of wallpaper?

Yes, but ensure the wall is smooth and level. Secure the panels with screws through the wallpaper and into the wall. Conceal screw heads with wood filler.

Can I install Legacy MDF panels near heat sources?

Panels can be installed near, but not in direct contact with, heat sources. Maintain at least 45cm of clearance and use extra adhesive for secure bonding.