SlatWall Charcoal

Each panel measures 600 x 2400mm or 3000mm

Simply apply our Hybrid Grab Adhesive to the back of each panel and apply pressure to adhere it to the wall. Alternatively, fix it to the wall using screws in a coordinating colour with the felt backing. See our fitting guide for more information.

We recommend cutting SlatWall panels with a fine-toothed hand saw instead of power tools. You can also use a sharp utility knife to cut the felt backing.

Yes, absolutely. Alternatively, we offer a range of pre-oiled shades, including oiled Natural Oak, Washed Oak and Deep Walnut.

Measure the height and width of your chosen space in metres, then multiply these values together. If you're installing 2.4m panels, divide your total by 1.44. If you are installing 3m panels, divide your total by 1.8. Round this number up to calculate how many panels you'll need.

Yes, by using screws through the wallpaper and into the wall.

SlatWall panels may be installed near, but not in direct contact with, heat sources. We recommend installing SlatWall panels at least 45cm away from the heat source. See our fitting guide for more information.

We recommend installing SlatWall panels in dry areas with low humidity and no water contact. For areas with high humidity or direct water contact, use our SlatWall Waterproof panels instead.

Hoover with a soft brush nozzle and wipe with a damp cloth. We recommend keeping abrasive cleaners and chemicals away from your panels.

Yes, you can. Simply apply our Hybrid Grab Adhesive to the back of each panel and apply pressure to adhere. Alternatively, use screws, ensuring they are fixed to structural points such as joists. See our fitting guide for more information.