Peel & Stick Planks Alaska

Each plank measures 127 x 1200mm.

One box contains seven planks and will cover 1.07m².

Simply peel away the tape's paper backing on the back of the plank, align it with your chosen placement on the wall and apply pressure to secure it. Always use our J-Roller to maximise adhesion. See our fitting guide for more information.

We recommend cutting Peel & Stick planks with a fine-toothed hand saw instead of power tools.

Measure the height and width of your chosen space in metres, then multiply these values together. Divide this number by 1.07 then round your answer up to calculate how many packs you'll need.

As Peel & Stick planks are made from wood, they can slightly expand and contract depending on the temperature of your room. We recommend acclimatising your planks by unboxing and placing them in your chosen room for at least three days before installation.

We recommend removing wallpaper before installing Peel & Stick planks.

Peel & Stick planks may be installed near, but not in direct contact with, heat sources. We recommend installing Peel & Stick planks at least 45cm away from the heat source. Always acclimatise Peel & Stick planks for at least three days before installation. See our fitting guide for more information.

We recommend installing Peel & Stick planks in dry areas with low humidity and no water contact.

Hoover with a soft brush nozzle and wipe with a damp cloth. We recommend keeping abrasive cleaners and chemicals away from your planks.

Yes, you can. See our fitting guide for more information.